See us on


 U-shafts attachment

 

"U" Shafts attach to the splinter bar at the same location as the pair pole does.
1.Remove the attachment rod (B) by sliding it in the direction shown (C)
 
2. Place the shaft attachment sleeve (A) into the receiver.
3. Slide the attachment rod (B) into place.
4. Place the locking ring ping through the hole in the attachment rod.
 

:: back ::

 

 

1. Loosen the screws "A" on the U-frame and place each shaft inside the U-frame separately
 
 
 
 
 
 
 
 
 
 
 
2. Tighten the "A" screws