See us on

Shaft attachment and adjustment


1. Slide Shaft Receiver into the attachment point for the end of the Pair Splinter Bar. 
Replace bolt and tighten enough to hold in place but not enough to prevent shaft from moving up or down. Check bolt periodically to ensure that it is properly tightened.
2. To adjust shaft, loosen Shaft Receiver Tension Bolt on underside of Shaft Receiver.
3. Slide shaft into Shaft Receiver and adjust length and rotate the shaft to fit 
your horse. Tighten bolt in Shaft Receiver to securely hold shaft in place. 
Check bolt periodically to ensure that bolt is properly tightened.

:: back ::